CEL +IonPRO drill 10,8V DRP1 - drill / driver +IonPRO System - CEL Czech

Go to content

Main menu:

CEL +IonPRO drill 10,8V DRP1 - drill / driver +IonPRO System

Workshop > +IonPRO System
+Ion Pro vrtačka/šroubovák DRP1-B13

Drill CEL +IonPRO - DRP1

Power input



Johnson 600


Yes, electronic


2 speed
left / right

Torque settings

17 + 1

Battery makeup

Li-Ion, 3 cells Sanyo

Weight of battery

0,19 kg



Charging time

15min. to 80% capacity
30min. to 100% capacity

No-load speed

G1: 0 - 350 / min.
G2: 0 - 1200 / min.


max. 25Nm diam 10mm


Power level battery indicator

Variable speed


Integrated work light

Integrated powerfull LED


0,9 kg without battery

Product code


Product describtion:

Compact, light drill / driver from line CEL +IonPRO with which you can easilly work whole day. For first look small drill gives huge torque as a bigger drills. LED work light will help in better orientation on work place and battery level indicator will inform you continuously about drill condition. Line +IonPRO uses compact 10.8V Li-Ion accumulators, compatibille with wide range of other tools (multi-tool, LED torch, reprociating saw, delta sander). For precise screw driving helps integrated electronic brake. Accumulators placed in compact case are protested by electronical protection curcuit in case of stuck in material. Batteries are equipped with quality SANYO cells, which has been before expedition from factory cycled by 80 cycles of charge and discharge! Fast charger ICP3 handles SAFELY charge accumulator in 30 minutes, 80% of capacity till 15 minutes. Rest of 20% capacity will take another 15 minutes. You dont need to buy lot of accumulators like with other tools, which has slow 3 hrs chargers. Cheap chargers are not commonly equipped by protection circuits, which protects cells against overcharging during charge.

Use for:

Slow or fast drilling
Precise screwing or unscrewing of screws
Drilling holes for jig saw usage etc

Drill parameters:
Motor - 10.8V 600 Johnson
Gearbox - 2 speed
No-load speed - G1: 0-350/min, G2: 0-1200/min
Max. torque - 25Nm diam. 10mm
Electronic brake - Yes
Hammer - No
Variable speed - Yes
Left / right turning
Torque setting - 17+1
Chuck Size min-max - 0,1 - 10mm
Screw screwing up to - 7mm
Max. drill diameter in steel - 10mm
Drill diameter in wood - 19mm
Drill diameter in concrete - 10mm
Weight - 0,9 kg without battery
Soften handles
LED light
Durable steel gearbox

Input - 220 - 240V AC 50Hz 48W
Output - 12V DC 3A
Charging time max. 30 min

Battery makeup - Li-Ion 10,8V 1300 mAh or Li-Ion 10,8V 2000 mAh
Charging time - max. 30 min


Návod k obsluze


No comments
Copyright 2015. All rights reserved.
Back to content | Back to main menu