Accessories for oscilating tools - system CEL - CEL Czech

Hledat
Go to content

Main menu:

Accessories for oscilating tools - system CEL

Workshop > +Ion System
Uchycení CEL OIS - rozměry
Uchycení CEL - rozměry

CEL OIS - universal system of attaching tools
In the picture are marked dimensions for system CEL OIS (standard for most of multi-tool producers).

CEL - system of attaching tools
In the picture are marked diamaters for system CEL (without 12 holes around central part).

MT-AC01 - D Shape  Carbide Grit  Edge Grinder 65mm
This blade can also be used for removing tile joints and general cutting or grinding of most hard materials, the segment shape allows the blade to get right into the corners and up to edges without over cutting.

MT-AC02 - Diamond-Coated Semicircle Saw Blade, 65mm
In addition to the features of the carbide grit semicircle saw blade, the diamond-coated semicircle saw will impress you with it's noticeably higher service life. It is also more suitable for outdoor use, it is frost resistant and can be used on sealant materials containing epoxy resin.

vzřadit MT1-AC02 - Diamantový půlkruhový řezací kotouček 65mm
Určeno pro odstraňování spárovací hmoty, řezání a tvarování omítky, porézních hmot a zdiva. Umožňuje velmi přesné nařezávání a řezání. Plochý na jedné straně tak, aby bylo možno řezat v rozích. Systém uchycení - perforace CEL (bez 12-ti otvorů po obvodu centrálního otvoru).

MT-AC03 - Carbide Rasp Finger 45x35x4mm Double sided rasp area
Sand down cement, concrete, stone, plaster, tile adhesive, paint and wood; use the carbide finger rasp to save yourself time and difficult manual work.
Can be used to flatten surfaces in confined areas; the carbide rasp is a great all-round accessory for tiling. It can smooth adhesive glue and grind tiled edges to ensure a flat supporting surface when replacing tiles.

vzyřadit MT1-AC03 - Karbidový brusný prst
Hrubý brusný nástroj pro práci na malých a špatně přístupných místech. Brousí a odstraňuje materiály jako je cement, beton, omítka, kámen, malta nebo lepidlo na zdivo a obklad. Systém uchycení - perforace CEL (bez 12-ti otvorů po obvodu centrálního otvoru).

MT-AC04 - Triangular Carbide Rasp 75mm
Sand down cement, concrete, stone, plaster, tile adhesive, paint and wood; use the carbide rasp to save yourself time and difficult manual work.

Can be used to flatten large surfaces, the carbide rasp is a great all-round accessory for tiling and shaping. it can smooth adhesive glue and grind tiled edges to ensure a flat supporting surface when replacing tiles.

MT-AC06 - Sanding Finger Pad 35x50mm double sided sanding area

Sand and smooth small and hard to reach areas such as between the slats of dining furniture and banisters. Hook and loop system for sanding papers.

MT-AC07 - Sanding Finger Sheets
Sanding Finger Sheets (40, 80, 120, 180, 220) 5 pcs each. Hook-&-Loop backed sanding sheets for detail or restricted work in a range of grits. Sand in tight places, the sanding finger works perfectly for tight or hidden spots. The flat sanding pad also gives you access to tight spaces, e.g. the slats of shutters.

Requires AC06 (Sanding Finger Pad)

vyradit MT-AC09 - Trojúhelníkový unášeč pro uchycení brusného papíru
Určeno pro uchycení brusných papírů různých zrnitostí (princip suchého zipu). Tvar nástroje umožňuje broušení v rozích nebo jiných detailech a provádění dokončovacích prací, velikost 75mm. Systém uchycení - perforace CEL (bez 12-ti otvorů po obvodu centrálního otvoru).

vyradit MT1-AC10 - Brusné papíry pro trojúhelníkový unášeč
Brusné papíry různých zrnitostí pro použití ve spojení s trojúhelníkovým unášečem MT1-AC09. Zrnitosti 40, 80, 120, 180.

MT-AC11 - Universal End Cut METAL BLADE 34mm
Cuts all types of material, real wood, laminate or composite materials, the universal E-CUT saw blade can cut everything, right to the edge. Plunge cut upto 40mm deep.

With the universal E-CUT fitting floors, replacing pipes, adding trim, chopping, cutting pockets, fitting electrical outlets etc has never been easier. You will find hundreds of uses for these saws.

For fast cutting wood and soft metals such as copper and aluminium CEL recommends using the AC12 instead of this blade.

MT-AC12 - Non-Ferrous End Cut WOOD BLADE 34mm
Cuts all types of material, real wood, laminate or composite materials, the universal E-CUT saw blade can cut everything, right to the edge. Plunge cut upto 40mm deep.

With the universal E-CUT fitting floors, replacing pipes, adding trim, chopping, cutting pockets, fitting electrical outlets etc has never been easier. You will find hundreds of uses for these saws.With the thinner universal E-CUT blade you can cut small pockets, cut in small locations and trim with extreme precision.

For harder metals use the AC11.

Unlike a rotating blade which throws the swarf (sawdust ) away from the cut, an oscillating blade does not. For more efficient cutting keep moving the blade within the cut to clear swarf and prevent clogging/burning.


MT-AC13 - Segment Saw Blade 80mm
Larger cutting area to allow constant movement which prevents heat buildup during longer cuts, eg skirting boards. Old windows can be effortlessly removed and renovated. Removal of brittle puttied corners without any danger to the glass. Make plunge cuts into any non ferrous material, and cut into a corner using the removed segment.

For fast cutting wood and soft metals such as copper and aluminium CEL recommends using the AC12. For harder metals use the AC11.

Unlike a rotating blade which throws the swarf (sawdust) away from the cut, an oscillating blade does not. For more efficient cutting keep moving the blade within the cut to clear swarf and prevent clogging/burning.

MT1-AC14 - Stainless Steel Scraper
Removes floor covering/adhesive residue, carpet adhesive residues, coatings or other stubborn substances that won't move with traditional rigid knives. Removes sealants; the oscillating knife is perfect for removing elastic materials, such as sealants, adhesive residue and paint, all over the house.

MT-AC14 - Stainless Steel Scraper

Removes floor covering/adhesive residue, carpet adhesive residues, coatings or other stubborn substances that won't move with traditional rigid knives. Removes sealants; the oscillating knife is perfect for removing elastic materials, such as sealants, adhesive residue and paint, all over the house.

MT1-AC15 - Universal End Cut, 10mm
Cuts all types of material, real wood, laminate or composite materials, the universal E-CUT saw blade can cut everything, right to the edge. Plunge cut upto 40mm deep.

With the universal E-CUT fitting floors, replacing pipes, adding trim, chopping, cutting pockets, fitting electrical outlets etc has never been easier. You will find hundreds of uses for these saws.
With the thinner universal E-CUT blade you can cut small pockets, cut in small locations and trim with extreme precision. For fast cutting wood and soft metals such as copper and aluminium CEL recommends using the AC12. For harder metals use the AC11.

MT-AC15 - Universal End Cut, 10mm

Cuts all types of material, real wood, laminate or composite materials, the universal E-CUT saw blade can cut everything, right to the edge. Plunge cut upto 40mm deep.
With the universal E-CUT fitting floors, replacing pipes, adding trim, chopping, cutting pockets, fitting electrical outlets etc has never been easier. You will find hundreds of uses for these saws.
With the thinner universal E-CUT blade you can cut small pockets, cut in small locations and trim with extreme precision. For fast cutting wood and soft metals such as copper and aluminium CEL recommends using the AC12. For harder metals use the AC11.



MT1-AC16 - Felt Polishing Pad
No matter if the surface is painted, chrome, wood or stone, the felt polishing pad brings an excellently bright shine to the surfaces right into the corners.
Use dry or with a cutting or polishing agent.

vyradit MT1-AC17 - Distanční kroužek (adaptér) pro použití alternativního příslušenství
Tento adaptér umožní použití alternativního příslušenství od jiných výrobců v přístrojích CEL Multi2PRO 10,8V (MT1)i MultiPRO 220V (MT3).

MT1-AC18 -Carbide End Cut 34mm
Plunge cut up to 40mm deep. With the Carbide E-CUT blade you can cut small pockets out of brick and masonry, cut in small locations and cut in electrical sockets. Perfect for chasing in cables. Hard wearing Carbide will last a long time and can be cleaned easily with a wire brush.

MT-AC18 - Carbide End Cut 34mm

Plunge cut up to 40mm deep. With the Carbide E-CUT blade you can cut small pockets out of brick and masonry, cut in small locations and cut in electrical sockets. Perfect for chasing in cables. Hard wearing Carbide will last a long time and can be cleaned easily with a wire brush.

MT1-AC20 - Universal Blade Adaptor to use CEL blades on other manufacturers tools.

Universal blade adaptor compatible with the Bosch 12 stud external fitting, Worx hexagon fitting and the Fein 4 pointed star fitting, which also covers most brands of oscillating multi-tool.

vyradit MT1-SC01 Nůžkový adaptér
Stejně jako ostatní příslušenství lze nůžky jednoduše upnout do  strojů CEL Multi2PRO MT1 a MT3. Získáte tak nástroj na střihání koberců, pryže, lina, lepenky atd. Společnost CEL má toto řešení zapsáno jako čekající patent (určeno pouze pro stroje CEL MT1 a CEL MT3).

MT-AC29 - Delta Sanding Pad 90mm
This sanding pad holds triangular sheets for corners and detailed sanding.
Extremely effective in corners. Requires AC30 (Delta Sanding Sheets).

MT-AC30 - Sanding Sheets (40, 80, 120, 180) 5 pcs of each 90mm
The AC29 sanding pad holds triangular sheets for corners and detailed sanding.
Extremely effective in corners. Requires AC29 (Delta Sanding Pad).

AP08 - Oscillating Multi-tool Cutting Pack
The AP08 was put together in response to requests from professionals using out Multi-tools and blades. A small but robust case contains an excellent range of cutting blades for wood, metal, plastic and masonry. Duplicates of the most popular blades make this pack amazing value. The CEL OIS fitting system allows these blades to fit most brands directly. For Fein tools you will need to get the AC20 adaptor.
ACCESSORY CASE containing:
2x AC11 Universal End Cut
2x AC12 Wood End Cut
2x AC13 Wood "D" shape
1x AC15 Wood narrow
1x AC18 Masonry End Cut

AP09 - Oscillating Multi-Tool Sanding and Grinding Pack
Oscillating Multi-Tool Sanding and Grinding Pack- Robust carry case full of grinding and sanding accessories and attachments exclusively compatible with the CEL Multi-tool range.

Whats in the box?
1 x AC03 Carbide Finger Rasp
1 x AC04 Delta Carbide Rasp
1 x AC06 Sanding Finger Pad AC07 Sanding Finger Sheets - 5 pcs of each 40, 80, 120, 180, 220 Grit
1 x AC09 Delta Sanding Pad AC10 Delta Sanding Sheets 4 pcs of each 40, 80, 120, 180 Grit
1 x AC14 Stainless Steel Scraper

AP10 - 59pc Accessory Set for Oscillating Multi-tools.  A complete set of blade, grinder and sanding tools

AP10 is the perfect starter pack for almost any oscillating multi-tool. A huge selection of cutting, sanding, grinding and polishing accessories which will allow you to make use of the amazing versatility of CEL or many other multi-tools.
CEL OIS is an Oscillating Interface System which CEL has created to allow these blades to fit any CEL Multi-tool including +Ion and +IonPRO models and the majority of other brands. These include Bosch, Makita and any tool which can use blades from these brands directly.
These blade do not directly fit Fein tools, requires the AC20 adaptor to be fitted first, sold separately.
This set is an upgrade from the extremely successful AP05 set, along with the great blades from that set it includes larger sanding sheets and pad, even more blades and the new CEL OIS fitting system.
Whats in the box?
1x WS1-AC01 ACCESSORY CASE WITH DIVIDERS
1x AC01- Carbide Grit Semicircle saw blade 65mm
1x AC02 - Diamond Coated Semicircle saw blade 65mm
1x AC03 - Carbide Rasp Finger
1x AC04 - Delta Carbide Rasp
1x AC06 - Sanding Finger Pad
5x AC07-40G - Finger Sanding Sheet
5x AC07-80G - Finger Sanding Sheet
5x AC07-120G - Finger Sanding Sheet
5x AC07-180G - Finger Sanding Sheet
5x AC07-220G - Finger Sanding Sheet
1x AC11 - 34mm End Cut for Metal
1x AC12 - 34mm End Cut for Wood
1x AC13 - D Shape for Wood
1x AC14 - Stainless Steel Scraper
1x AC15 - 10mm End Cut for Wood
1x AC16 - Delta Polishing Pad
1x AC18 - 34mm End Cut for Masonry
1x AC29 - 90mm Delta Sanding Pad
5x AC30-40G - 90mm Delta Sanding Sheet
5x AC30-80G - 90mm Delta Sanding Sheet
5x AC30-120G - 90mm Delta Sanding Sheet
5x AC30-180G - 90mm Delta Sanding Sheet
 
Copyright 2015. All rights reserved.
Back to content | Back to main menu