POWER8workshop PRO from CEL, the big brother to the World’s 1st cordless workstation was born from previous version CEL POWER8workshop:
Clever use of the Cast machined aluminium armoured case and spirit level allow the 18v Lithium Ion (Li-Ion) cordless tools to transform into their bench top equivalent, with neither quality nor power compromised by extra functionality. Everything packs into an incredibly small padded nylon bag which fits inside the case, making the product compact and portable. The fast charger is built into the case so there is no need to unpack anything to start charging the battery; there’s also a secondary charger point (SCP) so that you can charge a battery at the same time as using another to power the benchtop functions.
The ideal tool set for professional tradesmen and DIY enthusiasts; the POWER8workshop PRO allows you to work whenever and wherever you are. At only 525 x 365 x 225mm (LxWxH) and 17Kg it is the most portable workstation available and can be used remotely from a mains outlet.
The CEL PROcase has a lid which is a single piece of cast then machined aluminium with a stainless steel insert near the saw blades. The locking mechanism has been beefed up to take the huge torque of the CS2 CEL PROsaw. It also allows the Jigsaw and other future additions to lock in the same way as before. Large Diameter 165mm saw blades allow over 2" depth cut and more efficient ripping. The ultra-powerful Mabuchi Motor combined with a Li-Ion POWERhandle PRO provides the torque and cutting time to take on jobs that would normally require an AC saw. Combined with the PROcase this saw becomes an excellent table saw with features normally only seen on big table saws.
A Cordless Hammer Drill/Driver Head from the POWER8 range (HD02). Extremely powerful and great for any job including drilling concrete and masonry. 20 torque settings, 2 speed gearbox, single collar all metal ratcheting chuck 1-13mm, Hammer action, 2 double ended Driver Bits, replaceable Motor Brushes, Spindle Lock, Electronic Brake. Combine with the PROcase and Post/Fence to create an excellent portable drill press/pillar drill.
The PH12 18V 3000mAh CEL POWERhandle PRO has been developed to give CEL PRO Tools the power to perform the toughest jobs. High current output allows this POWERhandle to run any compatible tool at its maximum.
Charger for pro Lithium Ion, Ni-CD and NiMH POWERhandle
Li-Ion 80% in 30 min, 100% in 60 min
Chargin time depends on capacity and level of charge of accumulator.
Plug to mains and charge second POWERhandle, while the first powers tools.
Compatibille with Li-Ion, NiCd and NiMH POWERhandle incl. PH01, PH02, PH03, PH04, PH12
Engine 18V Mabuchi RZ-8BAWA (900) with electronic brake
Fully Ballraced Metal 2 Stage Orbital Gearbox
No-load speed 4000
Variable Speed - N0
Sole plate Cast Machined Aluminium
Circular saw blade nominal diameter 165 mm
Circular saw blade bore diameter 16mm or 20mm with included adaptor
Cutting depth range at 90° 57mm
Cutting depth range at 45° 35mm
Spindle lock Yes
Protective guard Auto Retract and Fixed for Table Saw
Engine type 600
Gearbox 2 Speed, Steel
No-load speed 0 - 300/0 - 1250
Max. torque 25Nm/60Nm
Hammer Action 0 - 5600/0 - 20000/min-1
Variable Speed Yes
Torque settings 20 + Hammer
Chuck Size min-max 1 - 13 mm
Parameters of PH12 3Ah POWERhandle:
Power input 22V DC
Power output 18V DC
Battery Makeup Lithium Ion
Cell arrangement 5x2 cells
Battery operating voltage 18V
Battery Capacity (per battery) 3Ah (3000mAh)
Battery runtime with no load (mins) Depends on tool fitted
Variable Speed Yes
Power input AC 100 - 240V 50/60Hz
Power output DC 23V