+IonPRO System - power tools - CEL Czech

Hledat
Go to content

Main menu:

+IonPRO System - power tools

Here you can buy products from line +IonPRO, powered by accumulators Li-Ion 10,8V with compact size, which company C Enterprise Czech s.r.o. distributes on czech market.

CEL +IonPRO Multi-tool MTP1 - bare tool only

CEL +IonPRO Multi-tool MTP1 - bare tool only

MTP1 is the next level for Cordless Multi-tools. Featuring a CEL OIS blade clamping system and readily available blade. Perfectly shaped grip areas allowing 2 handed power or pen style accuracy. The LED worklight and battery indicator mean you always know whats going on.

+IonPRO tools use a compact 10.8V Lithium Ion battery which is compatible with a range of complimentary products that provide more power speed and functionality than has ever been possible before.

Crammed into a very compact and easy to handle package, every part and feature has been carefully selected and designed to ensure the tool functions perfectly thoughout its lifetime.

Battery protection ensures no damage is done if the tool jams or is overloaded.
The +IonPRO charger is spectacular, featuring a massive 3Amp output for ultra fast charge times in a very small package.

NOTE! This tool is sold bare, if you do not already own a compatible battery and charger then you will need to purchase these separately to use this tool.

Quantity Discount available Quantity Discount available
69,00 € Add
CEL +IonPRO Multi-tool MTP1-B13

CEL +IonPRO Multi-tool MTP1-B13

MTP1 is the next level for Cordless Multi-tools. Featuring a CEL OIS blade clamping system and readily available blades. Perfectly shaped grip areas allowing 2 handed power or pen style accuracy. The LED worklight and battery indicator mean you always know whats going on.

+IonPRO tools use a compact 10.8V Lithium Ion battery which is compatible with a range of complimentary products that provide more power speed and functionality than has ever been possible before.
Crammed into a very compact and easy to handle package, every part and feature has been carefully selected and designed to ensure the tool functions perfectly thoughout its lifetime.
Battery protection ensures no damage is done if the tool jams or is overloaded.
The +IonPRO charger is spectacular, featuring a massive 3Amp output for ultra fast charge times in a very small package.

Whats is the box?:
1x MTP1 Multi-tool
1x 5mm hex key + screw with bolt
1x IPB13 battery 10,8V 1300mAh Li-Ion
1x IPC3 Fast charger
1x AC11 blade
1x AC14 stainless scrapper
1x AC29 - 90mm tiangular sanding pad
1x AC30 - 90mm 40G triangular snading sheetr
1x AC30 - 90mm 80G triangular snading sheet
1x AC30 - 90mm 120G triangular snading sheet
1x AC30 - 90mm 180G triangular snading sheet

Quantity Discount available Quantity Discount available
129,00 € Add
CEL +IonPRO Multi-tool with accessories in case MTP1-C

CEL +IonPRO Multi-tool with accessories in case MTP1-C

MTP1 is the next level for Cordless Multi-tools. Featuring a CEL OIS blade clamping system and readily available blades. Perfectly shaped grip areas allowing 2 handed power or pen style accuracy. The LED worklight and battery indicator mean you always know whats going on.

+IonPRO tools use a compact 10.8V Lithium Ion battery which is compatible with a range of complimentary products that provide more power speed and functionality than has ever been possible before.
Crammed into a very compact and easy to handle package, every part and feature has been carefully selected and designed to ensure the tool functions perfectly thoughout its lifetime.
Battery protection ensures no damage is done if the tool jams or is overloaded.
The +IonPRO charger is spectacular, featuring a massive 3Amp output for ultra fast charge times in a very small package.

Whats in the box?:
1x MTP1 Multi-tool
1x 5mm hex key + screw with bolt
2x IPB13 battery 10,8V 1300mAh Li-Ion
1x IPC3 Fast charger
1x BMC-A case
1x AP10 accessories for multi-tools

Quantity Discount available Quantity Discount available
233,00 € Add
CEL +IonPRO drill DRP1 - bare tool only

CEL +IonPRO drill DRP1 - bare tool only

The DRP1 is the drill you will pick up every time, this compact unit has enough torque to do jobs that would normally need a much bigger drill, switch to high speed for smaller drill bits and fast cutting. It looks and feels small but this drill is perfect for most drilling requirements. The LED worklight and battery indicator mean you always know whats going on.

+IonPRO tools use a compact 10.8V Lithium Ion battery which is compatible with a range of complimentary products that provide more power speed and functionality than has ever been possible before.
Crammed into a very compact and easy to handle package, every part and feature has been carefully selected and designed to ensure the tool functions perfectly thoughout its lifetime.
Battery protection ensures no damage is done if the tool jams or is overloaded.
The +IonPRO charger is spectacular, featuring a massive 3Amp output for ultra fast charge times in a very small package.

NOTE! This tool is sold bare, if you do not already own a compatible battery and charger then you will need to purchase these separately to use this tool.

Quantity Discount available Quantity Discount available
55,00 € Add
CEL +IonPRO drill DRP1-B13

CEL +IonPRO drill DRP1-B13

The DRP1 is the drill you will pick up every time, this compact unit has enough torque to do jobs that would normally need a much bigger drill, switch to high speed for smaller drill bits and fast cutting. It looks and feels small but this drill is perfect for most drilling requirements. The LED worklight and battery indicator mean you always know whats going on.

+IonPRO tools use a compact 10.8V Lithium Ion battery which is compatible with a range of complimentary products that provide more power speed and functionality than has ever been possible before.
Crammed into a very compact and easy to handle package, every part and feature has been carefully selected and designed to ensure the tool functions perfectly thoughout its lifetime.
Battery protection ensures no damage is done if the tool jams or is overloaded.
The +IonPRO charger is spectacular, featuring a massive 3Amp output for ultra fast charge times in a very small package.

NOTE! This tool is sold bare, if you do not already own a compatible battery and charger then you will need to purchase these separately to use this tool.

Whats in the box?:
1x DRP1 Drill/driver
1x IPB13 10,8V 1300 mAh Li-Ion battery
1x IPC3 Fast charger
6x HSS drill, 1mm - 6mm

Quantity Discount available Quantity Discount available
119,00 € Add
CEL +IonPRO drill with accessories in case DRP1-C

CEL +IonPRO drill with accessories in case DRP1-C

The DRP1 is the drill you will pick up every time, this compact unit has enough torque to do jobs that would normally need a much bigger drill, switch to high speed for smaller drill bits and fast cutting. It looks and feels small but this drill is perfect for most drilling requirements. The LED worklight and battery indicator mean you always know whats going on.

+IonPRO tools use a compact 10.8V Lithium Ion battery which is compatible with a range of complimentary products that provide more power speed and functionality than has ever been possible before.
Crammed into a very compact and easy to handle package, every part and feature has been carefully selected and designed to ensure the tool functions perfectly thoughout its lifetime.
Battery protection ensures no damage is done if the tool jams or is overloaded.
The +IonPRO charger is spectacular, featuring a massive 3Amp output for ultra fast charge times in a very small package.

NOTE! This tool is sold bare, if you do not already own a compatible battery and charger then you will need to purchase these separately to use this tool.

Whats in the box?:
1x DRP1 Drill/driver
1x IPB13 10,8V 1300 mAh Li-Ion battery
1x IPC3 Fast charger
1x BMC-A case
1x AP07 set of driills and bits

Quantity Discount available Quantity Discount available
145,00 € Add
CEL +IonPRO Reciprocating Saw IPR1 - bare tool only

CEL +IonPRO Reciprocating Saw IPR1 - bare tool only

The 10.8V +IonPRO Reciprocating Saw has a compact and light weight design that allows for comfortable operation and superb handling, making it extremely versatile. This saw is used for more arduous tasks such as construction and demolition work. It works with an in and out (reciprocating) motion. Cut through metal, plastic and wood with ease. Tool-less blade change increases efficiency allowing you to easily switch between tasks. Features include a metal soleplate, powerful 13mm stroke, invertable blade fitting and trigger lock. Onboard bright white LED worklight and battery indicators mean you always stay in control. The IPR1 Reciprocating Saw is a tool designed for professional use to make tough and time consuming jobs faster and easier

+IonPRO tools use a compact 10.8V Lithium Ion battery which is compatible with a range of complimentary products that provide more power speed and functionality than has ever been possible before.
Crammed into a very compact and easy to handle package, every part and feature has been carefully selected and designed to ensure the tool functions perfectly throughout its lifetime.
Battery protection ensures no damage is done if the tool jams or is overloaded.
The +IonPRO charger is spectacular, featuring a massive 3Amp output for ultra fast charge times in a very small package.

Whats in the box?:
1x IPR1 +IonPRO Reciprocating Saw bare tool only
1x RS01 6" x 0.92 x 5 - 8T Fast Wood blade
1x RS02 6" x 0.92 x 10T Soft metals and Wood blade
1x RS03 6" x 0.92 x 18T Metal blade

Quantity Discount available Quantity Discount available
81,00 € Add
CEL +IonPRO Reciprocating Saw IPR1-B13

CEL +IonPRO Reciprocating Saw IPR1-B13

The 10.8V +IonPRO Reciprocating Saw has a compact and light weight design that allows for comfortable operation and superb handling, making it extremely versatile. This saw is used for more arduous tasks such as construction and demolition work. It works with an in and out (reciprocating) motion. Cut through metal, plastic and wood with ease. Tool-less blade change increases efficiency allowing you to easily switch between tasks. Features include a metal soleplate, powerful 13mm stroke, invertable blade fitting and trigger lock. Onboard bright white LED worklight and battery indicators mean you always stay in control. The IPR1 Reciprocating Saw is a tool designed for professional use to make tough and time consuming jobs faster and easier

+IonPRO tools use a compact 10.8V Lithium Ion battery which is compatible with a range of complimentary products that provide more power speed and functionality than has ever been possible before.
Crammed into a very compact and easy to handle package, every part and feature has been carefully selected and designed to ensure the tool functions perfectly throughout its lifetime.
Battery protection ensures no damage is done if the tool jams or is overloaded.
The +IonPRO charger is spectacular, featuring a massive 3Amp output for ultra fast charge times in a very small package.

Whats in the box?:
1x IPR1 +IonPRO Reciprocating Saw bare tool only
1x IPB13 10,8V 1300 mAh Li-Ion battery
1x IPC3 Fast charger
1x RS01 6" x 0.92 x 5 - 8T Fast Wood blade
1x RS02 6" x 0.92 x 10T Soft metals and Wood blade
1x RS03 6" x 0.92 x 18T Metal blade

Quantity Discount available Quantity Discount available
148,00 € Add
CEL +IonPRO Reciprocating Saw in case IPR1-C

CEL +IonPRO Reciprocating Saw in case IPR1-C

The 10.8V +IonPRO Reciprocating Saw has a compact and light weight design that allows for comfortable operation and superb handling, making it extremely versatile. This saw is used for more arduous tasks such as construction and demolition work. It works with an in and out (reciprocating) motion. Cut through metal, plastic and wood with ease. Tool-less blade change increases efficiency allowing you to easily switch between tasks. Features include a metal soleplate, powerful 13mm stroke, invertable blade fitting and trigger lock. Onboard bright white LED worklight and battery indicators mean you always stay in control. The IPR1 Reciprocating Saw is a tool designed for professional use to make tough and time consuming jobs faster and easier

+IonPRO tools use a compact 10.8V Lithium Ion battery which is compatible with a range of complimentary products that provide more power speed and functionality than has ever been possible before.
Crammed into a very compact and easy to handle package, every part and feature has been carefully selected and designed to ensure the tool functions perfectly throughout its lifetime.
Battery protection ensures no damage is done if the tool jams or is overloaded.
The +IonPRO charger is spectacular, featuring a massive 3Amp output for ultra fast charge times in a very small package.

Whats in the box?:
1x IPR1 +IonPRO Reciprocating Saw bare tool only
2x IPB13 10,8V 1300 mAh Li-Ion battery
1x IPC3 Fast charger
1x RS01 6" x 0.92 x 5 - 8T Fast Wood blade
1x RS02 6" x 0.92 x 10T Soft metals and Wood blade
1x RS03 6" x 0.92 x 18T Metal blade
1x BMC-A case

Quantity Discount available Quantity Discount available
207,00 € Add
CEL +IonPRO LED torch ITP1 - bare tool only

CEL +IonPRO LED torch ITP1 - bare tool only

The ITP1 +IonTorch uses a bank of 24 light emiting diodes (LED) combined with a polished metal reflector gives a wide beam of 3m @ 1m distance as well as a bright spotlight of 0.5m @ 1m. This clever bulb arrangement allows the light to be used as a handheld spotlight or a handy area worklight.

In addition to the 2 light patterns the +IonTorch can be transformed from a compact hand torch to a stable worklight, there is even a handy metal loop to allow hanging in either mode.

+IonPRO tools use a compact 10.8V Lithium Ion battery which is compatible with a range of complimentary products that provide more power speed and functionality than has ever been possible before. Crammed into a very compact and easy to handle package, every part and feature has been carefully selected and designed to ensure the tool functions perfectly thoughout its lifetime.

Battery protection ensures no damage is done if the tool jams or is overloaded.

The +IonPRO charger is spectacular, featuring a massive 3Amp output for ultra fast charge times in a very small package.

NOTE! This tool is sold bare, if you do not already own a compatible battery and charger then you will need to purchase these separately to use this tool.

Quantity Discount available Quantity Discount available
18,00 € Add
CEL +IonPRO oscilační nástroj a vrtačka s příslušenstvím v kufříku  IP-CP1

CEL +IonPRO oscilační nástroj a vrtačka s příslušenstvím v kufříku IP-CP1

Oscilační přístroj MTP1 z řady +IonPRO (renovátor) vybavený systémem uchycení příslušenství CEL OIS. Ergonomicky tvarované plochy pro uchopení umožňují dobře využít sílu obou rukou a provádět práci vyžadující velkou přesnost. LED přísvit a indikátor nabití baterie vás budou průběžně informovat o stavu přístroje. Kompaktní, lehká vrtačka / šroubovák z řady CEL +IonPRO se kterou bez problémů zvládnete pracovat celý den. Na pohled malá vrtačka disponuje točivým momentem jako mnohem větší modely, LED přísvit a indikátor stavu nabití baterie vás budou průběžně informovat o stavu vrtačky. +IonPRO používá kompaktní 10.8V Li-Ion baterie, kompatibilní s širokou škálou dalších produktů. Akumulátory uložené v kompaktním pouzdře, jsou chráněny před poškozením pro případy uvíznutí, nebo přetížení.
Obsah balení:
1x MTP1 oscilační přistroj
1x 5mm imbusový klíč + jistící šroub s podložkou
1x DRP1 vrtačka/šroubovák
2x IPB13 akumulátor 10,8V 1300mAh Li-Ion
1x IPC3 rychlonabíječka
1x BMC-A kufřík
1x AP10 příslušenství k oscilačním přístrojům
6x HSS vrták, průměr 1mm - 6mm
Baleno v šedém kartónu.

Quantity Discount available Quantity Discount available
7.390,00 € Add
CEL +IonPRO Fast charger 230V IPC3

CEL +IonPRO Fast charger 230V IPC3

Using this charger the +IonPRO Battery can be 80% full in under 15mins on the the battery can be removed at this point with no permanent effect, the following 20% charge will take another 15 mins.
Charging the +IonPRO Battery from flat to full will take only 30 mins.

Quantity Discount available Quantity Discount available
40,00 € Add
CEL +IonPRO Li-Ion battery 1,3Ah IPB13

CEL +IonPRO Li-Ion battery 1,3Ah IPB13

+IonPRO tools use this compact 10.8V Lithium Ion battery which is compatible with a range of complimentary products that provide more power speed and functionality than has ever been possible before.

This Lithium Ion battery has no memory effect and can be charged using a +IonPRO charger (IPC3) in under 30 mins from flat.

The +IonPRO Battery will be 80% full in under 15mins on the IPC3 +IonPRO Charger the battery can be removed at this point with no permanent effect, the following 20% charge will take another 15 mins.

Quantity Discount available Quantity Discount available
40,00 € Add
CEL +IonPRO Li-Ion battery 2,0Ah IPB20

CEL +IonPRO Li-Ion battery 2,0Ah IPB20

+IonPRO tools use this compact 10.8V Lithium Ion battery which is compatible with a range of complimentary products that provide more power speed and functionality than has ever been possible before.

This Lithium Ion battery has no memory effect and can be charged using a +IonPRO charger (IPC3) in under 30 mins from flat.

The +IonPRO Battery will be 80% full in under 15mins on the IPC3 +IonPRO Charger the battery can be removed at this point with no permanent effect, the following 20% charge will take another 15 mins.

Quantity Discount available Quantity Discount available
48,00 € Add
CEL BMC-A Pro plastic case

CEL BMC-A Pro plastic case

Blow molded, stackable carry case with metal clips and foam padding.

When used with the packing tray your tool comes boxed with this case will securely hold your CEL products in a stackable, durable but lightweight case with metal clips and foam padding.

Internal Dimensions - Length 360mm Width 253mm, Depth 80mm + 20mm Lid Depth
External Dimensions - Length 400mm Width 320mm Depth 120mm

Commonly used with MT1, MT3, DR1, HD01, JS02, IDP1, MTP1, DRP1, ITP1

A tray that will hold products in place can be supplied free of charge to match any of MT1, MT3, DR1, HD01, JS02, IDP1, MTP1, DRP1, ITP1 please contact CEL before the case is shipped to have one included and avoid additional shipping costs.

Quantity Discount available Quantity Discount available
22,00 € Add
CEL Oscillating Multi-tool Cutting Pack AP08

CEL Oscillating Multi-tool Cutting Pack AP08

The AP08 was put together in response to requests from professionals using out Multi-tools and blades. A small but robust case contains an excellent range of cutting blades for wood, metal, plastic and masonry. Duplicates of the most popular blades make this pack amazing value. The CEL OIS fitting system allows these blades to fit most brands directly. For Fein tools you will need to get the AC20 adaptor.

Whats in the box?:
ACCESSORY CASE containing:
2x AC11 Universal End Cut
2x AC12 Wood End Cut
2x AC13 Wood "D" shape
1x AC15 Wood narrow
1x AC18 Masonry End Cut

Quantity Discount available Quantity Discount available
28,00 € Add
CEL Oscillating Multi-Tool Sanding and Grinding Pack AP09

CEL Oscillating Multi-Tool Sanding and Grinding Pack AP09

CEL Oscillating Multi-tool Sanding and Grinding Pack Accessory Set; is full of grinding and sanding accessories and attachments exclusively compatible with attachments for use with MultiPRO, Multi2PRO and POWERmulti oscillating multi-tools. The pack is great value as buying items individually will cost considerably more.

Also compatible with most other manufacturers oscillating multi-tools when used with the AC20 Universal Blade Adaptor, which can be purchased separately.

Whats in the box?
1 x AC03 Carbide Finger Rasp
1 x AC04 Delta Carbide Rasp
1 x AC06 Sanding Finger Pad AC07 Sanding Finger Sheets - 5 pcs of each 40, 80, 120, 180, 220 Grit
1 x AC09 Delta Sanding Pad AC10 Delta Sanding Sheets 4 pcs of each 40, 80, 120, 180 Grit
1 x AC14 Stainless Steel Scraper

Quantity Discount available Quantity Discount available
24,00 € Add
CEL 59pc Accessory Set for Oscillating Multi-tools AP10

CEL 59pc Accessory Set for Oscillating Multi-tools AP10



AP10 is the perfect starter pack for almost any oscillating multi-tool. A huge selection of cutting, sanding, grinding and polishing accessories which will allow you to make use of the amazing versatility of CEL or many other multi-tools.
CEL OIS is an Oscillating Interface System which CEL has created to allow these blades to fit any CEL Multi-tool including +Ion and +IonPRO models and the majority of other brands. These include Bosch, Makita and any tool which can use blades from these brands directly.
These blade do not directly fit Fein tools, requires the AC20 adaptor to be fitted first, sold separately.
This set is an upgrade from the extremely successful AP05 set, along with the great blades from that set it includes larger sanding sheets and pad, even more blades and the new CEL OIS fitting system.

Whats in the box?
1x WS1-AC01 ACCESSORY CASE WITH DIVIDERS
1x AC01- Carbide Grit Semicircle saw blade 65mm
1x AC02 - Diamond Coated Semicircle saw blade 65mm
1x AC03 - Carbide Rasp Finger
1x AC04 - Delta Carbide Rasp
1x AC06 - Sanding Finger Pad
5x AC07-40G - Finger Sanding Sheet
5x AC07-80G - Finger Sanding Sheet
5x AC07-120G - Finger Sanding Sheet
5x AC07-180G - Finger Sanding Sheet
5x AC07-220G - Finger Sanding Sheet
1x AC11 - 34mm End Cut for Metal
1x AC12 - 34mm End Cut for Wood
1x AC13 - D Shape for Wood
1x AC14 - Stainless Steel Scraper
1x AC15 - 10mm End Cut for Wood
1x AC16 - Delta Polishing Pad
1x AC18 - 34mm End Cut for Masonry
1x AC29 - 90mm Delta Sanding Pad
5x AC30-40G - 90mm Delta Sanding Sheet
5x AC30-80G - 90mm Delta Sanding Sheet
5x AC30-120G - 90mm Delta Sanding Sheet
5x AC30-180G - 90mm Delta Sanding Sheet

Quantity Discount available Quantity Discount available
55,00 € Add
MT-AC01 D Shape Carbide Grit Edge Grinder 65mm

MT-AC01 D Shape Carbide Grit Edge Grinder 65mm

This blade can also be used for removing tile joints and general cutting or grinding of most hard materials, the segment shape allows the blade to get right into the corners and up to edges without over cutting.

Carbide is extremely hard wearing, so this blade should cut for many hours without a drop in performance.

Quantity Discount available Quantity Discount available
9,20 € Add
Karbidový brusný prst MT-AC03

Karbidový brusný prst MT-AC03

Příslušenství pro oscilační přístroje. Hrubý brusný nástroj pro práci na malých a špatně přístupných místech. Brousí a odstraňuje materiály jako je cement, beton, omítka, kámen, malta nebo lepidlo na zdivo a obklad, Rozměry 45x35x4mm. Systém uchycení CEL OIS.

Quantity Discount available Quantity Discount available
219,00 € Add
MT-AC04 Triangular Carbide Rasp 75mm

MT-AC04 Triangular Carbide Rasp 75mm

Sand down cement, concrete, stone, plaster, tile adhesive, paint and wood; use the carbide rasp to save yourself time and difficult manual work.

Can be used to flatten large surfaces, the carbide rasp is a great all-round accessory for tiling and shaping. it can smooth adhesive glue and grind tiled edges to ensure a flat supporting surface when replacing tiles.

Carbide is extremely hard wearing, so this blade should cut for many hours without a drop in performance.

Quantity Discount available Quantity Discount available
8,10 € Add
Unášeč (prst) pro uchycení brusného papíru MT-AC06

Unášeč (prst) pro uchycení brusného papíru MT-AC06

Příslušenství pro oscilační přístroje. Určeno pro uchycení brusných papírů různých zrnitostí (princip suchého zipu) z obou stran nástroje. Tvar nástroje umožňuje broušení v jinak těžko přístupných místech, na malých plochách a v rozích, rozměry 35x50mm. Systém uchycení CEL OIS.

Quantity Discount available Quantity Discount available
99,00 € Add
MT-AC07 - Sanding finger sheets

MT-AC07 - Sanding finger sheets

Hook and Loop backed sanding sheets for detail or restricted work in a range of grits. Sanding papers 40, 80, 120, 180, 220.

Quantity Discount available Quantity Discount available
5,90 € Add
Brusné papíry pro prstový unašeč MT-AC07-40

Brusné papíry pro prstový unašeč MT-AC07-40

Brusné papíry se suchým zipem určené pro oscilační přístroje - renovátory, zrnitost 40, doporučený unašeč MT-AC06 nebo MT1-AC06, 5ks v balení.

Quantity Discount available Quantity Discount available
49,00 € Add
Brusné papíry pro prstový unašeč MT-AC07-80

Brusné papíry pro prstový unašeč MT-AC07-80

Brusné papíry se suchým zipem určené pro oscilační přístroje - renovátory, zrnitost 80, doporučený unašeč MT-AC06 nebo MT1-AC06, 5ks v balení.

Quantity Discount available Quantity Discount available
49,00 € Add
Brusné papíry pro prstový unašeč MT-AC07-120

Brusné papíry pro prstový unašeč MT-AC07-120

Brusné papíry se suchým zipem určené pro oscilační přístroje - renovátory, zrnitost 120, doporučený unašeč MT-AC06 nebo MT1-AC06, 5ks v balení.

Quantity Discount available Quantity Discount available
49,00 € Add
Brusné papíry pro prstový unašeč MT-AC07-180

Brusné papíry pro prstový unašeč MT-AC07-180

Brusné papíry se suchým zipem určené pro oscilační přístroje - renovátory, zrnitost 180, doporučený unašeč MT-AC06 nebo MT1-AC06, 5ks v balení.

Quantity Discount available Quantity Discount available
49,00 € Add
Brusné papíry pro prstový unašeč MT-AC07-220

Brusné papíry pro prstový unašeč MT-AC07-220

Brusné papíry se suchým zipem určené pro oscilační přístroje - renovátory, zrnitost 220, doporučený unašeč MT-AC06 nebo MT1-AC06, 5ks v balení.

Quantity Discount available Quantity Discount available
49,00 € Add
MT-AC11 Universal End Cut METAL BLADE 34mm

MT-AC11 Universal End Cut METAL BLADE 34mm

Cuts all types of material, real wood, laminate or composite materials, the universal E-CUT saw blade can cut everything, right to the edge.

With the universal E-CUT fitting floors, replacing pipes, adding trim, chopping, cutting pockets, fitting electrical outlets etc has never been easier. You will find hundreds of uses for these saws.

For fast cutting wood and soft metals such as copper and aluminium CEL recommends using the AC12 instead of this blade.

Quantity Discount available Quantity Discount available
5,50 € Add
MT-AC12 Non-Ferrous End Cut WOOD BLADE 34mm

MT-AC12 Non-Ferrous End Cut WOOD BLADE 34mm

Plunge cut upto 40mm deep. Cuts all types of material, real wood, laminate or composite materials, the universal E-CUT saw blade can cut everything, right to the edge.

With the universal E-CUT fitting floors, replacing pipes, adding trim, chopping, cutting pockets, fitting electrical outlets etc has never been easier. You will find hundreds of uses for these saws.

With the thinner universal E-CUT blade you can cut small pockets, cut in small locations and trim with extreme precision.

For fast cutting wood and soft metals such as copper and aluminium CEL recommends using the AC12.

For harder metals use the AC11.

Unlike a rotating blade which throws the swarf (sawdust ) away from the cut, an oscillating blade does not.

For more efficient cutting keep moving the blade within the cut to clear swarf and prevent clogging/burning.

Quantity Discount available Quantity Discount available
5,50 € Add
MT-AC13 Segment Saw Blade 80mm

MT-AC13 Segment Saw Blade 80mm

Larger cutting area to allow constant movement which prevents heat buildup during longer cuts, eg skirting boards. Old windows can be effortlessly removed and renovated. Removal of brittle puttied corners without any danger to the glass.

Small chopping is effortless with the segment saw blade.

Make plunge cuts into any non ferrous material, and cut into a corner using the removed segment.

For fast cutting wood and soft metals such as copper and aluminium CEL recommends using the AC12. For harder metals use the AC11.

Unlike a rotating blade which throws the swarf (sawdust ) away from the cut, an oscillating blade does not.

For more efficient cutting keep moving the blade within the cut to clear swarf and prevent clogging/burning.

Quantity Discount available Quantity Discount available
6,60 € Add
Škrabka z nerezové oceli MT-AC14

Škrabka z nerezové oceli MT-AC14

Příslušenství pro oscilační přístroje. Určeno pro odstraňování elastických materiálů, barev, zbytků lepidla, tmelů, podlahových krytin atd. Je možno použít pro řezání koberce. Systém uchycení CEL OIS.

Quantity Discount available Quantity Discount available
149,00 € Add
Univerzální dokončovací pilka pro nekovové materiály MT-AC15

Univerzální dokončovací pilka pro nekovové materiály MT-AC15

Příslušenství pro oscilační přístroje. Určena pro řezání nekovových materiálů např. dřevo, laminát, plast. Řez je možno vést až do hloubky 40mm, perfektní pro použití v těžko dostupných místech. Šířka pilky 10mm. Systém uchycení CEL OIS.

Quantity Discount available Quantity Discount available
149,00 € Add
Plstěný leštící nástroj MT-AC16

Plstěný leštící nástroj MT-AC16

Příslušenství pro oscilační přístroje. Pro leštění nebo aplikaci pasty. Tvar nástroje umožňuje práci ve špatně přístupných místech i rozích. Určeno pro leštění široké škály materiálů - barvy a laky, kovy, chrom, dřevo, kámen atd. Systém uchycení CEL OIS.

Quantity Discount available Quantity Discount available
199,00 € Add
Karbidová pilka na cihly a zdivo MT-AC18

Karbidová pilka na cihly a zdivo MT-AC18

Příslušenství pro oscilační přístroje. Přímá pilka na cihly a zdivo. Extra tvrdý karbidový břit v kombinaci s oscilací brusky efektivně vyřeže drážky pro kabely, nebo díry pro elektrické krabičky. Ideální pro použití ve špatně dostupných místech. Hlouba řezu až 40mm, šířka pilky 34mm. Systém uchycení CEL OIS.

Quantity Discount available Quantity Discount available
199,00 € Add
MT-AC29 Delta Sanding Pad 90mm

MT-AC29 Delta Sanding Pad 90mm

This sanding pad holds triangular sheets for corners and detailed sanding. Extremely effective in corners.

Requires AC30 (Delta Sanding Sheets).

Quantity Discount available Quantity Discount available
6,60 € Add
MT-AC30 - Sanding sheets (40, 80, 120, 180) 5 pcs of each 90mm

MT-AC30 - Sanding sheets (40, 80, 120, 180) 5 pcs of each 90mm

Requires AC29 (Delta sanding pad)

Quantity Discount available Quantity Discount available
11,90 € Add
 
Copyright 2015. All rights reserved.
Back to content | Back to main menu